欢迎光临乐清市美格尔电子电器有限公司官方网站!

>美格尔

联系我们

  • 联系电话:

    0577-62875133

  • 传真:

    0577-62987133

  • E-mail:

    mgr@mgr.top

工业级固态继电器

当前位置:首页 > 产品总汇 > 产品中心 > 工业级固态继电器

MGR-AH3400Z 工业级交流固态继电器 ( 基本型 )

所属:工业级固态继电器

产品介绍

◎ 型号含义 Type meaning

`image.png`/

① 控制电压 85-265VAC Control voltage 85-265VAC

② 长条形 Long strip

③ 负载电压 30-480VAC Load voltage 30-480VAC

④ 400A, 500A

⑤ 过零型 Zero-crossing type


◎ 产品概述 Product overview

◆ 额定电流:400A-500Amps

◆ 额定电压:30-480VAC

◆ 控制电流:≤ 10mA

◆  背靠背 SCR 输出适合商业级重工业级应用,性能可靠

◆ " 超低 " 的输入电流

◆ 低输出断态漏电流

◆ 低输出通态压降

◆ 具有 LED 灯输出指示

◆ 包含标准输出的 R-C 缓冲器


◆ Rated current: 400A-500Amps

◆ Rated voltage: 30-480VAC

◆ Control current: ≤ 10mA

◆ Reverse-parallel SCR as the output component can be used in commercial or heavy industrial applications with reliable performance

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-steat voltage drop

◆ Display output status via LED

◆ Standard output R-C buffer


注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .


Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.


◎ 安装尺寸及接线图 Installation dimensions and wiring diagram

`image.png`/

注:特殊电压可定做。Note: Specific voltage can be customized.



关注微型平台

Copyright © 2020 乐清市美格尔电子电器有限公司 All Rights Reserved 版权. 浙ICP备0522718号