◎ 型号含义 Type meaning 

① 5A,10A

② 控制电压 3-32VDC Control voltage 3-32VDC

③  负载电压 5-220VDC Load voltage 5-220VDC

◎ 产品概述 Product overview

◆ 额定电流：5A-10Amps

◆ 额定电压：5-220VDC

◆ 控制电压：3-32VDC

◆ 控制电流：≤ 10mA

◆ " 超低 " 的输入电流

◆ 低输出断态漏电流

◆ 低输出通态压降

◆ 低阻抗 MOSFET 输出，最大限度减少总功耗

◆ Rated current: 5A-10Amps

◆ Rated voltage: 5-220VDC

◆ Control voltage: 3-32VDC

◆ Control current: ≤ 10mA

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-state voltage drop

◆ Low-impedance MOSFET as the output  component minimize the total power consumption

注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .

Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed. 

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

◎ 安装尺寸及接线图 Installation dimensions and wiring diagram